A tradesmen is only as good as his tools! Having to replace expensive tools and equipment would be a daunting task for any of us.
VanGadgets rear tailgate window security 'grilles' or 'solid-blanks' are made from sheet steel (finished in a powder-coated grey finish) and are an economical deterrent that can significantly reduce the risk of theft from your van.
All tailgate grilles or tailgate blank kits are fitted on the inside of the glazed window area and come supplied with a FREE FIXING KIT and simple fitting instructions in order to complete the easy DIY installation.
Tools You Will Need To Fit This Product...
Electric Drill / Cross Head Screw Driver / 3.2mm Drill Bit / Pliers.
Easy DIY Installation...
If your grille/blank has bendable tabs, use pliers to bend the tabs (only enough to fit to the bodywork). Then carefully Drill into the bodywork through one of the tabs and fix with a self tapping screw supplied. Then press the grille/blank close to the glass and drill the rest of the holes and fit the rest of the screws.
NB: Do not bend the tabs the wrong way as they may break off when bending back the correct way. Always wear safety glasses when drilling.
Approximate fitting time 20 minutes. |
